Fn-A4 (U) Patent Design Implant Type Top Mounted Instrument Tray Dental Equipment Chair

Product Description

FN-A4(U)  Patent Design implant type top mounted instrument tray Dental chair unit

* Chair frame with synchronized control system
* This model: supply free backrest, seat cushion with massage heating function
* Handpiece tube with heating function
* 6 LED bulbs dental light with sensor (illuminance digital display, Color temperature adjustment, and anti - curing function)
* Upgrade model: Shadowless lamp, ECG monitor, oral camera (optional parts)
* silica gel strong and week sution tip connector (with negative pressure tube)
* Imported leather from USA
* Cast aluminum backrest, cast aluminum base, cast aluminum armrest base, cast aluminum drainage box, Cast aluminum supporting
base
* The instrument tray, assistant stool, led dental operating light all can be rotated for 180 degrees. It is very convenient for
doctors to operate with their left or right hands.
* patient chair can be rotated 30 degree
* customized 10000 Nm motor (can load 185 kgs)

poly sponge foot sport
Specification

Power Voltage	AC220V-230V, 50Hz
Water Pressure	0.20-40Mpa / 2.0-4.0 bar
Air Pressure	0.55-0.80Mpa / 5.5-8.0 bar
Output	≥55L/min(water vacuum)
	≥120L/min(air vacuum)

Setting Position

Dental clinic piping requirements

1.Water supply pipe: white PPR Fusion Tube, reserved 4 points copper internal tooth interface (PPR Fusion Tube is recommended, 4 points internal and external tooth straight through valve)

2.Air supply pipe: white PPR Fusion Tube, reserved 4 points copper internal tooth interface(PPR Fusion Tube is recommended, 4 points internal and external tooth straight through valve )

3.Drainage pipe: White  PVC drain pipe, main pipe 17mm,branch pipe φ50mm.

4.VGA video screen and USB data cable: white PVC threading pipe φ 32mm, leaving a wire to be threaded in the future;

5.Negative pressure pipe: blue UPVC water supply pipe, outer pipe outer diameter φ50mm,branch pipe outer diameter φ 32mm, access to the outer diameter of the dental chair tube25 25mm.

6.Negative pressure signal line: white PVC threading tube, 4 points φ20mm) sleeve2*1mm2 line;

7.Power cord: white PVC threading tube, 4 points (φ 20mm) sleeve 3*1.5mm2 line; Note: Straight angle joints cannot be used at the drain and negative pressure pump connections, and 45 degree joints are used. The water purifier water supply and the air compressor inlet air must be reserved for the switch.

Our company reserves the right to make any improvement on product design without advance notice.

Packing&shipping:

Packaging: wooden case

Shippipng: by sea, air, Express

Certification:
CE & FDA & ISO


Our services:

1. Your inquiry will be replied within 12 hours

2. Competitive prices, high quality, excellent after-sales services

3. All the dental units will be inspected strictly before out of factory, we have strict management and quality control systems.

4. Try our utmost to support & protect our agents, protection of your sales area, and all your private information.